Audi A4

since 1994 of release

Repair and car operation

A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ exhaust System
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and absorption channels
+ injection System
+ Coupling
- Transmission and main transfer
   Mechanical transmission
   Noise in a transmission
   Automatic transmission
   Electronic control by a transmission
   Main transfer
   Power shafts
   Check of cuffs of power shafts
   The help at malfunctions
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ ignition System
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ body Details
+ Salon
Search of malfunctions
Technical characteristics

Power shafts

In order that you at movement and management of car did not feel influence of power shafts on a steering, hinges of power shafts should transfer force in all positions of shock-absorbers and a wheel absolutely evenly. The problem of hinges which on one settle down on each end of power shafts consists in it. In the Audi A4 series we deal with two various types of hinges:

First, in Audi A4 there are so-called gomokinetichesky hinges (the synchronized hinges). Their function is based on back and forth motion of six balls on specially ground directing at a hinge bend. Thus, at any possible tilt angle of a power shaft in the car absolutely uniform transfer of force is carried out. Gomokinetichesky hinges are established in all cars with a mechanical transmission and with the four-cylinder engine, and also in all quattro cars with a mechanical transmission (ahead and behind). Besides, they are established as external hinges in cars with an automatic transmission and in cars with six-cylinder engines.

So-called трипод it is established as the internal hinge, i.e. from a transmission, on cars with an automatic transmission (in front and all-wheel drive, but only ahead) and in cars with six-cylinder engines (with a forward drive). Instead of six balls this hinge has three rollers on needle roller bearings. Advantage of this design: a low gear of fluctuations from a drive to a body.