Audi A4

since 1994 of release

Repair and car operation



A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ exhaust System
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and absorption channels
+ injection System
+ Coupling
+ Transmission and main transfer
- Suspension bracket of wheels and steering
   Running gear
   Check of cuffs of the steering mechanism
   Check of dustproof caps and gap in heads of cross-section steering draft
   Check of dustproof caps of hinges of an axis
   Check люфта steering wheel
   Check of a maple belt
   Check of level of oil
   Check of a gap of the wheel bearing
   Shock-absorbers
   Check of shock-absorbers
   The help at malfunctions
   Adjustment of wheels
   Measurement of adjustment of wheels
   The help at malfunctions
   Independent works on a running gear and a steering
   Dismantling of a suspension bracket of forward wheels
   Works with the back bridge
   Shock-absorber replacement behind
   Steering
   Works on a steering
   Check of tightness of a servoupravleniye
   Poliklinova belt
   The help at malfunctions
   Adjustment of the steering mechanism
   Dismantle of the pump of a servoupravleniye
   Filling and pumping of system of a servoupravleniye
   Safety cushion
   Safety instructions
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ ignition System
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ body Details
+ Salon
Search of malfunctions
Technical characteristics





Adjustment of the steering mechanism

 PERFORMANCE ORDER

  1. Put wheels directly.
  2. Let your assistant повращает to the left and to the right a steering wheel about average situation – is heard knock or a clicking.
  3. At the same time carefully and slowly turn an adjusting bolt to the right (screwing up) until clicks in the car will disappear.
  4. Carry out a trial trip: the steering should not have a heavy course in one of provisions or especially be got jammed. Otherwise replace the steering mechanism.

Replacement of a dustproof cuff of the steering mechanism

It is possible to replace a cuff of the steering mechanism at the established steering mechanism.

 PERFORMANCE ORDER

  1. Dismantle a head of cross-section steering draft.
  2. Press through shlangovy collars.
  3. Remove an old dustproof cuff.
  4. Pull a new rubber ring of round section and a new dustproof cuff.
  5. Put new shlangovy collars.
  6. Fix cross-section steering draft.