Audi A4

since 1994 of release

Repair and car operation



A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ exhaust System
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and absorption channels
+ injection System
+ Coupling
+ Transmission and main transfer
- Suspension bracket of wheels and steering
   Running gear
   Check of cuffs of the steering mechanism
   Check of dustproof caps and gap in heads of cross-section steering draft
   Check of dustproof caps of hinges of an axis
   Check люфта steering wheel
   Check of a maple belt
   Check of level of oil
   Check of a gap of the wheel bearing
   Shock-absorbers
   Check of shock-absorbers
   The help at malfunctions
   Adjustment of wheels
   Measurement of adjustment of wheels
   The help at malfunctions
   Independent works on a running gear and a steering
   Dismantling of a suspension bracket of forward wheels
   Works with the back bridge
   Shock-absorber replacement behind
   Steering
   Works on a steering
   Check of tightness of a servoupravleniye
   Poliklinova belt
   The help at malfunctions
   Adjustment of the steering mechanism
   Dismantle of the pump of a servoupravleniye
   Filling and pumping of system of a servoupravleniye
   Safety cushion
   Safety instructions
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ ignition System
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ body Details
+ Salon
Search of malfunctions
Technical characteristics





Filling and pumping of system of a servoupravleniye

The control system is filled in and pumped over in case separate knots of hydraulic system were replaced and consequently it was necessary to merge hydraulic oil.

 PERFORMANCE ORDER

  1. Clean the filter in a tank flushing gasoline.
  2. Fill in new hydraulic oil to a mark "MOVE". The merged oil do not use.
  3. Prop up a forward part of the car from two parties and at the switched-off engine of 10 times slowly turn a wheel from an emphasis against the stop.
  4. Add hydraulic oil to a mark "MOVE".
  5. Start the engine and again turn a wheel of 10 times from an emphasis against the stop.
  6. If level of liquid falls, put wheels directly and add liquid while level will constantly not keep on a mark "MOVE". At wheel rotation in a tank air vials any more should not rise.
  7. Check liquid level after a short trip.