Audi A4

since 1994 of release

Repair and car operation



A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ exhaust System
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and absorption channels
+ injection System
+ Coupling
+ Transmission and main transfer
- Suspension bracket of wheels and steering
   Running gear
   Check of cuffs of the steering mechanism
   Check of dustproof caps and gap in heads of cross-section steering draft
   Check of dustproof caps of hinges of an axis
   Check люфта steering wheel
   Check of a maple belt
   Check of level of oil
   Check of a gap of the wheel bearing
   Shock-absorbers
   Check of shock-absorbers
   The help at malfunctions
   Adjustment of wheels
   Measurement of adjustment of wheels
   The help at malfunctions
   Independent works on a running gear and a steering
   Dismantling of a suspension bracket of forward wheels
   Works with the back bridge
   Shock-absorber replacement behind
   Steering
   Works on a steering
   Check of tightness of a servoupravleniye
   Poliklinova belt
   The help at malfunctions
   Adjustment of the steering mechanism
   Dismantle of the pump of a servoupravleniye
   Filling and pumping of system of a servoupravleniye
   Safety cushion
   Safety instructions
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ ignition System
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ body Details
+ Salon
Search of malfunctions
Technical characteristics





Check of dustproof caps and gap in heads of cross-section steering draft

Sharnirnye heads on the external end of cross-section steering drafts consist of steel spherical heads which greasings with a small amount are placed in synthetic covers and are not subject to maintenance. Protection of hinges against a dust and dampness is provided with the rubber caps which condition needs to be checked more often:

 PERFORMANCE ORDER

  1. Check all surface of dustproof cuffs on existence of cracks.
  2. Heads of cross-section steering drafts with the torn cuffs are considered as the defective – replace them.
  3. In hinges you can check gap existence on the raised car by wheel rocking concerning its vertical axis or by rocking of the most cross-section steering draft.
  4. Other possibility: let your assistant in the car standing on the earth will twist a steering wheel to the left and to the right, and you feel a hand, whether there is in the hinge a gap.
  5. At once replace cross-section steering drafts with a gap!
  6. By the same way it is checked, whether there is a gap in internal hinges of cross-section steering draft which are screwed together directly with a gear lath of a steering.
  7. If the internal hinge has defect, unfortunately, it is necessary to change all cross-section steering draft.