Audi A4

since 1994 of release

Repair and car operation



A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ exhaust System
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and absorption channels
+ injection System
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
- Brakes
   Independent work on brake system
   So the brake system works
   Check of brakes
   Brake liquid
   Check of level of brake liquid
   Check of brake system on tightness and existence of damages
   Replacement of brake liquid
   Disk brakes
   Measurement of thickness of overlays of forward disk brakes
   Check of a condition of brake disks
   Replacement of overlays of disk brakes
   Back disk brakes
   Measurement of overlays of back disk brakes
   Hand brake
   Check of idling of the lever of the hand brake
   Main brake cylinder
   Brake amplifier
   Check of the brake amplifier
   Works on hydraulics of brake system
   Pumping of brake system
   The help at malfunctions
   ABS and EDS
   What does ABS?
   Function of separate knots
   Electronic system of distribution of brake effort (EBV)
   Violations in ABS system work
   Electronic blocking of differential (EDS)
+ Wheels and tires
+ Electrotechnical equipment
+ ignition System
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ body Details
+ Salon
Search of malfunctions
Technical characteristics





Violations in ABS system work

At inclusion of ignition the control bulb of ABS on a control panel flashes. It should go out, when the engine will earn, or the latest at the speed which has exceeded 6 km/h. If onboard tension falls below 10 In, the control bulb also lights up. It can light up and in case one of wheels slips more long than 20 pages. Then again switch off ignition and anew start the engine.

If the bulb burns constantly, ABS is not ready for operation. In a workshop of Audi or Bosch should define the reason. As the fan you can check in any case shtekerny sockets of the control unit, sensors of number of turns or the hydraulic module. Besides, it is possible to recommend to disconnect sensors of number of turns and to clean their front party.

 Council: Even if the control bulb of ABS burns constantly, i.e. ABS does not work, you should conduct the car taking into account idle system of electronic distribution of brake effort. Brakes of back wheels can be blocked relatively early. Extra care is required on turns where at Audi with the blocked back brakes can bring a back part. Carefully driving the car, find Audi workshop.