Audi A4

since 1994 of release

Repair and car operation

A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ exhaust System
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and absorption channels
+ injection System
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ ignition System
- Lighting
   Lighting check
   Spare lamps
   Replacement of lamps of headlights
   Headlight dismantle
   Check of adjustment of headlights
   Fog lights
   Lamps of forward indexes of turns
   Back lamps
   Lamps of illumination of registration plate
   Lamp of illumination of salon
   Lamps for illumination of a control panel
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ body Details
+ Salon
Search of malfunctions
Technical characteristics

Headlight dismantle


  1. Dismantle the case of the index of turn.
  2. Dismantle a bumper (head of the Detail of a body).
  3. Unscrew two fixing screws above on a basic guard of the lock; two others – under a headlight.
  4. Take out a headlight forward.
  5. Behind on a headlight disconnect both mnogoshtyrkovy sockets.

Headlight dismantling

If the plafond of a headlight or a reflector is damaged became opaque, it is not necessary to change all headlight at once. Both details it is possible to buy as spare parts. That them to establish, it is necessary to disassemble the dismantled headlight.


  1. Take out from clips a rubber diaphragm above on a rasseivatel.
  2. Wring out all fixing clips on perimeter of a plafond of a headlight.
  3. Remove a rasseivatel and sealing rubber.
  4. Carefully wring out and take out the chromeplated diaphragm round a reflector.
  5. Dismantle a reflector. For this purpose:
  6. If in a headlight there is no antifog lamp, carefully wring out a reflector from arms.
  7. If in a headlight there is an antifog lamp, rotate both adjusting screws until it will be impossible to remove a reflector a hand.
  8. In the bottom point of support (connection with the engine of a regulator of range of light) the reflector is taken out from grooves as follows:
  9. Turn to the right a servomotor (the left headlight) or to the left (the right headlight) and in such a way remove it from the case.
  10. Take out a servomotor obliquely from the case of a headlight and wring out from grooves on a reflector.
  11. After assembly adjust a headlight.

 Council: Rasseivateli and reflectors of headlights is unessential for buying in a warehouse of the spare parts Audi. Shops of the accompanying goods receive them directly from the manufacturer (Bosch or Valeo).