Audi A4

since 1994 of release

Repair and car operation



A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ exhaust System
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and absorption channels
+ injection System
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ ignition System
- Lighting
   Lighting check
   Spare lamps
   Replacement of lamps of headlights
   Headlight dismantle
   Check of adjustment of headlights
   Fog lights
   Lamps of forward indexes of turns
   Back lamps
   Lamps of illumination of registration plate
   Lamp of illumination of salon
   Lamps for illumination of a control panel
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ body Details
+ Salon
Search of malfunctions
Technical characteristics


Ремонт стиральных машин на дому



Fog lights

Additional installation of fog lights

Bought in addition fog lights not so well look on a smooth body of Audi and almost are not established reliably in the right place. Therefore it is necessary to take the original version and completely to change headlights on same, but with the integrated headlights of a driving beam and fog lights ( details No. 8D0941 029B and 8D0941 030В). Relays of fog lights (detail No. 431 951 253G) and the original switch for a control panel (detail No. 4D0941 535) are in addition necessary. Then the case for the socket (detail No. 893971972) is necessary.

 PERFORMANCE ORDER

  1. Take out a blind cap in a control panel (near the switch of antifog lamps), and also dismantle the switch of back antifog lamps.
  2. Dismantle at the left under a control panel a reception pocket.
  3. On an electric circuit in head the Electrotechnical equipment prepare a set of wires with cases of sockets which corresponds to original electroconducting.
  4. Establish headlights with the integrated fog lights, connect sockets.
  5. On a relay support under the central switching knot at the left under a control panel replace a wire crossing point in a nest 10 with the relay of fog lights.
  6. Connect sockets of fog lights (head Tools and devices).
  7. Include, at inclusion at the same time in addition check functioning of lay fires, headlights of near and far light.