Audi A4

since 1994 of release

Repair and car operation

A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ exhaust System
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and absorption channels
+ injection System
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ ignition System
- Lighting
   Lighting check
   Spare lamps
   Replacement of lamps of headlights
   Headlight dismantle
   Check of adjustment of headlights
   Fog lights
   Lamps of forward indexes of turns
   Back lamps
   Lamps of illumination of registration plate
   Lamp of illumination of salon
   Lamps for illumination of a control panel
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ body Details
+ Salon
Search of malfunctions
Technical characteristics

Пупиллометр читайте здесь.

Lamps of forward indexes of turns

Dismantle of cases of lamps, replacement of lamps


  1. For dismantle of the right index of turn remove an air line.
  2. In an impellent compartment near the case of a headlight cast away a safety latch of the index of turn.
  3. Wring out down a fixing ledge of the case of the index of turn.
  4. Push forward the case of a lamp of the index of turn.
  5. Slightly turn to the left a cartridge of a lamp and take out it back.
  6. Slightly press in the boss the filament lamp, turn it to the left and take out.
  7. Installation: press a cartridge in the case of the index of turn and turn to the right against the stop.
  8. At installation the case of the index of turn carefully push in headlights directing on the case and insert ledges into grooves.
  9. Push a safety latch.

 Council: At orange filament lamps of indexes of turns the way of connection differs from transparent lamps. Both ledges below on the boss of these lamps settle down not opposite to each other, and with shift to avoid a mistake.

To dismantle the case of the index of turn from the headlight case, shift aside a safety latch (2) and press down a fixing ledge (1).

The case (3) indexes of turn with the taken-out boss (2) lamps. At installation of the case track that directing ledges (1 and 4) were carefully pushed in headlights directing in the case or on a wing.