Audi A4

since 1994 of release

Repair and car operation



A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ exhaust System
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and absorption channels
+ injection System
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ ignition System
- Lighting
   Lighting check
   Spare lamps
   Replacement of lamps of headlights
   Headlight dismantle
   Check of adjustment of headlights
   Fog lights
   Lamps of forward indexes of turns
   Back lamps
   Lamps of illumination of registration plate
   Lamp of illumination of salon
   Lamps for illumination of a control panel
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ body Details
+ Salon
Search of malfunctions
Technical characteristics





Back lamps

Having pressed a fixing ledge (2), it is possible to remove a cartridge (1) lamp of a back lamp.


All filament lamps of a back lamp take place on the general payment. 1–lamp of an antifog lamp; 2–backing lamp; 3–lamp of a tail light and stoplight fire; 4–lamp of the index of turn.


The switch (2) lamps of a backing settles down on the top party of a mechanical transmission and is kept by a slip (1).


At a 4-step automatic transmission (here it is dismantled) the switch of lamps of a backing is combined with the multipurpose switch (2). Besides, you see the shtekerny socket of the sensor (1) number of turns of a transmission.

Replacement of lamps

 PERFORMANCE ORDER

  1. Unscrew fixing caps and cast away aside luggage carrier facing behind back lamps.
  2. Press fixing ledges of the boss of a lamp and take out a cartridge.
  3. At replacement of filament lamps press them slightly in the boss, turn on the left and take out.

Dismantle

 PERFORMANCE ORDER

  1. Dismantle a cartridge of a lamp.
  2. Cast away luggage carrier facing in the field of back lamps.
  3. Unscrew four six-sided nuts on a luggage carrier.
  4. Take out outside the lamp case. If the case is still strongly pasted to a body at the expense of the laid sealing cord, it needs to be wrung out from a body the screw-driver which has been wrapped up by a rag.
  5. At installation check a sealing cord! There is a danger of penetration of water in a luggage carrier.

 Council: After dismantle of the case of a lamp, having pressed fixing clamps, it is possible to remove a diaphragm under a back lamp.