Audi A4

since 1994 of release

Repair and car operation



A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ exhaust System
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and absorption channels
+ injection System
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ ignition System
+ Lighting
+ Alarm equipment
- Tools and devices
   Check of control tools and bulbs
   The combined device
   Speedometer
   Tachometer
   Hours
   Indicator of amount of fuel
   The indicator of temperature of cooling liquid
   Auxiliary devices
   Control bulbs above in the combined device
   Control bulb of cooling liquid
   Control bulb of level of brake liquid
   Control bulb of pressure of oil
   Control bulb of indexes of turns
   Control bulbs in devices of a round form (and nearby)
   Control bulb of indexes of turn on the trailer
   Control bulb of ASR
   Control bulb of the lock of ignition
   Control bulb of headlights of a driving beam
   Control bulb of a safety cushion
   Control bulb of ABS
   Control bulb of the parking brake
   Control bulb of a battery charging
   System of autocontrol of the car
   Switches
   Ignition lock
   Check of switches
   Alarm buzzer of lighting
   Lighter
   Warmed back glass
   Check of screen wipers and stekloomyvatel
   Engine of screen wipers
   The help at malfunctions
   The liquid gulf for washing of glasses
   System of washing of headlights
   Mirror adjustment with the electric drive
   Central lock
   Window regulators with the electric drive
   Sliding/demountable roof with the electric drive
   Radio receiver
   The aerial on back glass
+ Heating and ventilation
+ body Details
+ Salon
Search of malfunctions
Technical characteristics





Check of screen wipers and stekloomyvatel

On the disassembled brush we designated in figures the following details

1–metal lever mechanism;
2–metal strip;

3–rubber nozzle of a brush of a screen wiper.


To remove a brush (1) screen wiper from its lever (2), it is necessary to pull down a small rychazhok (shooter) in order that the clamp jumped out of dredging on the lever.


The lever of a screen wiper (1) can be removed from an axis after an extraction of a protective cap (2) and weakening of its fixing nut. Move it there-here a little in order that a teeth was liberated.

Continuous control

 PERFORMANCE ORDER

  1. Include ignition.
  2. Whether
  3. screen wipers on both speeds work and whether come back after switching off to a starting position?
  4. Whether
  5. interval inclusion in work of screen wipers and automatic equipment of screen wipers / стеклоомывателей functions?
  6. Whether
  7. water from sprays of system of washing when pull for the switch of screen wipers arrives?

Replacement of brushes of a screen wiper

Rubber of screen wipers keeps about half a year. After that you should solve, whether you want to replace all brush of a screen wiper or – is cheaper – only a rubber nozzle. In any case it is necessary to remove a screen wiper brush from its lever.

 PERFORMANCE ORDER

  1. Cast away the lever of a brush of a screen wiper.
  2. Wring out down the plastic lever on an average axis of a brush of a screen wiper.
  3. At the same time remove a brush from the screen wiper lever.
  4. At installation press a screen wiper brush so that its groove entered into a fixing ledge on the lever.
  5. Do not mix a brush of screen wipers: the bent brush of a screen wiper is put on the party of the passenger near the driver.

Replacement of a rubber nozzle of a screen wiper

If the metal lever mechanism as it should be, it is necessary to replace only a rubber nozzle of a screen wiper:

 PERFORMANCE ORDER

  1. Buy a rubber nozzle on a sample.
  2. Unbend fixing clips round a rubber nozzle on the end of a brush of a screen wiper.
  3. Take out an old rubber nozzle and the metal strip enclosed about two party, put it on a new nozzle. Track that the bend was turned down (to glass).
  4. Insert a new nozzle and again compress fixing clips.

Dismantle of levers of screen wipers

 PERFORMANCE ORDER

  1. Open a cowl.
  2. Wring out a black protective cap ahead on an axis of a screen wiper and unscrew under it a six-sided nut. Remove a podkladny washer.
  3. Sharp movements to remove the lever from melkoshlitsevy connection of an axis of a screen wiper.
  4. Do not mix levers of screen wipers: the squeezed-out letter "F" costs on the lever from the driver, "In" – from the passenger near the driver.
  5. At installation screw levers of screen wipers so that each of them lay on black shaped marking under a windscreen.
  6. For this purpose it is necessary to be convinced that the engine of screen wipers is in the provision of a parking.
  7. Tighten six-sided nuts on 16 Nanometers.
  8. For test start screen wipers and once again check final situation.

 Council: Gromykhaniye and a scratch at work of screen wipers are connected with the wrong installation of a corner of a rubber nozzle of a screen wiper in relation to glass. The rubber nozzle should be to glass at right angle in order that – depending on the movement direction – it could bend in one and in other party. If the corner wrong, it is eliminated with a way of divorce of the lever of a screen wiper.