Audi A4

since 1994 of release

Repair and car operation



A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ exhaust System
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and absorption channels
+ injection System
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ ignition System
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
- Body details
   Front bumper
   Damages to result of failures
   Face-to-face part of the car
   Cowl
   Wings
   Lateral levels
   Doors
   Dismantling of doors
   Mirror of the external review
   Trunk lid
   Rear bumper
   Sliding/demountable roof
   Check of a corrosion-resistant coating of the bottom
   Pro-cleaning of openings for a water drain
+ Salon
Search of malfunctions
Technical characteristics





Trunk lid

Dismantle

 PERFORMANCE ORDER

  1. Open a cover.
  2. Remove a triangular warning sign.
  3. Unscrew an arm of a warning sign.
  4. Unscrew trunk lid facing.
  5. Disconnect the shtekerny socket of wires to electric knots in a trunk lid and stretch the socket through an entrance in metal.
  6. Disconnect a hose of the central lock.
  7. Cast away lock collars on gas-filled shock-absorbers on the right and at the left and remove them. After that it is possible to wring out gas-filled shock-absorbers from spherical heads.
  8. Holding a cover together, unscrew on the right and at the left two screws on a loop.
  9. Uncover a loop.
  10. It is possible to unscrew in addition the hinge from a body.

Trunk lid adjustment

Trunk lid loops: 1 and 2 – screws a loop/trunk lid; 3 and 4 – screws a loop/body.


The provision of a plate of the lock with a bolt (2) behind at the bottom of a luggage carrier can be adjusted after weakening of both screws (3). The plate of the lock becomes available facing after dismantle (1) edge of a luggage carrier.


 PERFORMANCE ORDER

  1. It is necessary, that a crack between a trunk lid and left, and also the right detail of a body was one width (about 3 mm). Back glass a crack between it and a cover on the right and at the left too should have an identical width.
  2. Adjustment is carried out after weakening of screws of a loop/trunk lid. Besides, the cover should be in one plane with lateral details of a body. It can be adjusted after weakening of screws of a loop / a lateral wall.
  3. If the trunk lid knocks or is badly closed, it is possible to adjust the persistent shock-absorber on the right and at the left below on a cover:
  4. Weaken the fixing screw and shift up or down and again tighten. Persistent shock-absorbers are established correctly in case they at the closed cover adjoin without tension.
  5. Check landing and trunk lid closing if it is necessary, carry out an additional adjustment of a plate of the lock of a luggage carrier.

Dismantle of the lock of a luggage carrier

 PERFORMANCE ORDER

  1. Open a cover.
  2. Remove a precautionary triangle.
  3. Unscrew an arm of a precautionary triangle.
  4. Unscrew trunk lid facing.
  5. Pusher dismantle: cast away a lock collar on an operating bar to a key wedge and remove a bar.
  6. Disconnect the socket of the central lock.
  7. Disconnect an air hose of the central lock.
  8. Unscrew two nuts, remove inside the press button with a lock drum.
  9. Dismantle of a key wedge: remove an operating bar (cast away sideways a lock collar).
  10. Unscrew two six-sided nuts on a key wedge, take out a key wedge down.