Audi A4

since 1994 of release

Repair and car operation

A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ exhaust System
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and absorption channels
+ injection System
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ ignition System
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
- Body details
   Front bumper
   Damages to result of failures
   Face-to-face part of the car
   Lateral levels
   Dismantling of doors
   Mirror of the external review
   Trunk lid
   Rear bumper
   Sliding/demountable roof
   Check of a corrosion-resistant coating of the bottom
   Pro-cleaning of openings for a water drain
+ Salon
Search of malfunctions
Technical characteristics

order cialis 20mg online

Lateral levels

Dismantle of shock-proof levels

Unfortunately, the varnished lateral levels cannot be removed from doors, without having destroyed them. The one who is ambitious, can try to remove a level, previously having heated up its hair dryer to 40 °C. Then wring out a level from facing by the screw-driver which has been wrapped up by a rag (for protection of varnishing). From a reverse side of doors wring out black caps.


    At installation the surface of metal of a door or a wing should be pure, obespylenny and fat-free. Besides, metal and a level should have a room temperature. Protective film remove from a level directly ahead of installation. Insert a level pins into openings, level and press in the field of gluing – especially on the ends. In addition press a level, strongly pressing on it (100 N/cm 2), or roll it the roller for wall-paper. For the period of hardening (4 hours) the car should be at room temperature.