Audi A4

since 1994 of release

Repair and car operation

A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ exhaust System
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and absorption channels
+ injection System
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ ignition System
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
- Body details
   Front bumper
   Damages to result of failures
   Face-to-face part of the car
   Lateral levels
   Dismantling of doors
   Mirror of the external review
   Trunk lid
   Rear bumper
   Sliding/demountable roof
   Check of a corrosion-resistant coating of the bottom
   Pro-cleaning of openings for a water drain
+ Salon
Search of malfunctions
Technical characteristics

Mirror of the external review

Mirror dismantle assembled

1–fixing screw;
2–a shaped detail from polyfoam for a noise isolation;

3–mnogoshtyrkovy socket.

Dismantle of mirror glass (4)

1–black facing below under a mirror;
2–facing screws;

Shooters showed clamps on mirror glass.

Dismantle of the case (1) mirror

2–mirror arm;

4–mirror glass.
Shooters showed screws with which the mirror case to an arm fastens.

Replacement of mirror glass

Mirror glasses in mirrors of Audi A4 fasten only spring clips. Dismantle:


  1. Weaken below on a mirror both screws with crosswise heads and remove black facing.
  2. Shift thus facing aside to take out clamps.
  3. Put on working gloves if there are chips.
  4. Through an opening in the bottom of a mirror it is possible to reach several clamps with which mirror glass to a servomotor fastens.
  5. Available clamps take out from grooves a screw-driver – then it is possible to wring out glass completely.
  6. Disconnect the socket of heating of a mirror.
  7. At installation insert mirror glass into frictional springs on the case. Establish glass on a ring of a servomotor and press so that it entered into clamps.
  8. Press the middle of glass and again put on gloves.

Dismantle of the case of a mirror


  1. Dismantle mirror glass.
  2. Unscrew a servomotor and remove.
  3. Unscrew three screws and remove the case from an arm up.

Mirror dismantle assembled


  1. Wring out from within the black decorative triangular panel in a triangle of forward lateral glass.
  2. Disconnect the mnogoshtyrkovy socket.
  3. Unscrew the fixing screw of a leg of a mirror.
  4. Remove a mirror assembled.

 Council: Information on functioning and check of adjustment of a mirror with the electric drive you will find Tools and devices in head.