Audi A4

since 1994 of release

Repair and car operation



A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ exhaust System
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and absorption channels
+ injection System
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ ignition System
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ body Details
- Salon
   Control panel
   Average console
   Seats
Search of malfunctions
Technical characteristics





Control panel

Dismantle of a reception pocket at the left

For dismantle of the left facing of the control panel combined with a reception pocket, weaken bolts with 1 on 4. At installation a reception pocket insert in directing ahead below.


By shooters it is shown, where there are bolts which need to be unscrewed at box dismantle for gloves.

The left bottom facing of a control panel which is combined with a reception pocket, almost always should be dismantled, when it is necessary to provide access to a reverse side of a control panel. According to simple dismantle is also:

 PERFORMANCE ORDER

  1. Remove facing of a box with safety locks at the left from outer side on a control panel.
  2. Unscrew four bolts with six-sided heads – two on a box with safety locks both on one on the right and to the left of a steering wheel.
  3. Slightly cast away down a reception pocket and remove it back.
  4. At installation track that the first line of facing was pushed in both directing ahead on the bottom of the car and on pedals.
  5. Besides, push the right upper edge in a bracket on a control panel.
  6. Do not tighten bolts too strongly.

Box dismantle for gloves

 PERFORMANCE ORDER

  1. Remove facing on the right from outer side on a control panel. Under it unscrew two bolts with six-sided heads.
  2. Open a box for gloves.
  3. Unscrew two screws in a box for gloves and the second above in the box.