Audi A4

since 1994 of release

Repair and car operation



A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ exhaust System
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and absorption channels
+ injection System
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ ignition System
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ body Details
- Salon
   Control panel
   Average console
   Seats
Search of malfunctions
Technical characteristics





Average console

Dismantle of a back part of the console

Dismantle of a back part of the console, 1st stage: take out a fixing hairpin (shooter) below on the handle (1) hand brake, remove forward from the lever of the parking brake the handle and facing (2).


Dismantle of a back part of the console, 2nd stage: after dismantle of an ashtray the nut (1) is behind weakened.


Dismantle of a back part of the console, 3rd stage: wring out a protective cap (2) behind on a forward part of the console (shooter), under it unscrew the screw (1).


 PERFORMANCE ORDER

  1. Extend the lever of the parking brake.
  2. Screw-driver wring out below on the handle of the parking brake a small fixing hairpin and take out.
  3. Take out the handle of the parking brake forward.
  4. Remove facing of the lever of the parking brake forward and up.
  5. Open an ashtray and take out.
  6. Weaken a nut under it.
  7. On the right and at the left wring out protective caps near a seam of a back/forward part of the console, unscrew under them screws.
  8. Lower a back part of the console on its forward part (wring out down).
  9. Pull up the hand brake and the console remove forward over the lever of the hand brake.
  10. Having highly lifted the console, take out from clips the socket of a wire of diagnostics near an ashtray.

Dismantle of a forward part of the console

Dismantle of a forward part of the console, 1st stage: in assembly mine of a radio receiver the screws designated here by figures from «1» to «4» should be weakened.


Dismantle of a forward part of the console, 2nd stage: in cars without climatic installation remove regulators of heating/ventilation and unscrew screws (shooters).


Dismantle of a forward part of the console, 3rd stage: screws from 1 to 4 should be unscrewed after removal of the decorative panel of the average console.


Dismantle of a forward part of the console, 4th stage: wring out a protective cap of the average console (2) ahead in feet of the driver, unscrew under it a nut (1).


 PERFORMANCE ORDER

  1. Disconnect a wire of weight of the accumulator.
  2. Dismantle a back part of the console assembled.
  3. Take out from grooves back edge of a frame of a cuff of the lever selector and shift up a cuff.
  4. At an automatic transmission: unscrew the lever selector button, remove facing.
  5. Dismantle a radio receiver (head Tools and devices).
  6. Weaken in assembly mine of a radio receiver two screws.
  7. Remove all three regulators of heating/ventilation.
  8. Unscrew under regulator buttons two screws.
  9. In cars with completely automated climatic installation it is excessive work.
  10. Remove the decorative panel of the average console (switches are not dismantled).
  11. Under the decorative panel unscrew four other screws.
  12. Wring out small facings in feet of the driver, under them unscrew a nut and remove the console over a cut hairpin.
  13. Remove the console back.
  14. At installation track that directing on the right ahead on the average console entered into a collar on a frame.

Dismantle of facing of a steering column

Information on dismantle of facing of a steering column you will find Switches in the section.

Facing dismantle in feet of the driver

Under facing of a rack of a door in feet of the driver there are arms of shtekerny sockets (see also head the Electrotechnical equipment).

Dismantle

 PERFORMANCE ORDER

  1. Open a door, remove a rubber level.
  2. Weaken two screws.
  3. Remove facing.