Audi A4

since 1994 of release

Repair and car operation



A4 Audi
+ Running gear
- Regular servicing
   Installation in a starting position of the indicator of periodicity of maintenance
   Crossing of dates of maintenance
   The maintenance plan for the motorist
   Diagnostics in Audi workshop
   Diagnostics of an executive element
   Poll of a database of malfunctions
   Diagnostics as the help to the fan
   Car identification
   Safety measures on a workplace
   Jacks
   Greasing of all details
   Check of level of oil
   Consumption of oil
   Oil choice with the correct specification
   Viscosity of oil
   Correctly picked up engine oil for Audi
   Replacement of engine oil and oil filter
   Check of level of liquid in servoupravleniye system
   Check of level of oil in a mechanical transmission
   Check of level of oil in a drive of the back bridge
   Control of level of ATF in an automatic transmission
   Check of level of oil in the main transfer of an automatic transmission
   ATF replacement
   Greasing of drafts, hinges and locks
+ Engines
+ Turbo-supercharging
+ exhaust System
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and absorption channels
+ injection System
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ ignition System
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ body Details
+ Salon
Search of malfunctions
Technical characteristics





Check of level of oil in a mechanical transmission

In a transmission lubricant means is spent not how in the engine, and can follow only through not tight sites. If on the case of a transmission there is no the dirty crust impregnated with oil, it is possible to consider that oil did not act and, respectively, is in a box. Otherwise it is necessary to check oil level.

 PERFORMANCE ORDER

  1. Lift and prop up the car in horizontal situation.
  2. Unscrew a bolt with an internal shestigrannik in 17 mm.
  3. If already thus pours out a little transmission oil, – oil level as it should be.
  4. Insert a finger into a carving opening and to the touch check, whether greasing liquid reaches an opening – level of oil is sufficient.
  5. If it is even less oil, add transmission oil of the necessary grade at petrol filling station or in car-care center.
  6. Audi orders oils of a class of viscosity of SAE 75 W-90 with the G 052 911 specification. Unlike the transmission oils which were filled in in older Audi models, in this case it is a question of synthetic oil.

 Council: Independently to fill in very dense transmission oil by means of a funnel and a long hose (even if it is warmed up) – the real test of patience. Therefore we do not advise it to do. It is better to use special dolivochny tanks with the connected hose.

At the left: the carving stopper (1) control of level of oil is in a mechanical transmission on a half of height of the case of a transmission.

On the right: the carving stopper of a drain opening (shooter) takes place under a transmission.